Otro "crack" para windows Vista

Después del primer chasco con los "cracks" para windows Vista, las personas que quieran instalar este SO que todavía esta carente de drivers y de compatibilidad con muchas aplicaciones sin soltar la lanota que M$ quiere por el tiene una nueva opción.

Este arreglo se hace llamar "Timerstop t2a", lo que hace es renovar el periodo de prueba de 30 días para que el SO no pida la llave, probablemente no sea una vulnerabilidad que dure mucho tiempo en Vista (probablemente desarrollen un parche y lo integren en los próximos discos y descargas)

Step-by-step how to use instructions to apply the TimerStop v2a crack for Windows Vista RTM x86 and x64 (32 and 64 bit):

1. The Windows Vista must be installed with no product key.
2. You will need to apply one of the “2099 trick”, either by install your Windows Vista in year 2099, or rearm Windows Vista in 2099 once (see second part of the article). Remember to disconnect the Internet so that the time won’t sync back to current date while rearm is in process, and change back the time after that.
3. Download the TimerStop_Crack_V2.0.rar (alternative download link) or TimerStop_V2a.zip archive, containing install.exe, timerstop.sys and TimerStop64.sys.
4. Unpack the archive in a temporary folder.
5. Run install.exe.
6. When prompted for permission to run as administrator, click on OK, as administrator’s rights and privileges are needed to install the driver.
7. On the installer window, press the “Test” button. Do not close the message box shown on screen, but you can ignore what is displayed.
8. Launch a elevated command prompt with administrative rights by right clicking on Command Prompt icon, then select “Run as Administrator”. Alternative method is to press Windows+R keyboard shortcut.
9. Type “slmgr.vbs -dlv” in the command prompt, a dialog box should popup in 10-20s.
10. Take note of the number of minutes remaining on “Time remaining” displayed on the last line, and close the dialog box.
11. Wait a few minutes, and run “slmgr.vbs -dlv” again.
12. If it works, the number of minutes remaining for Vista activation should be the same. You can then close the messagebox shown after pressing “Test”, and press the “Install” button to install and auto run the driver at each system start or reboot.
13. Check again your system with “slmgr.vbs -dlv” to see if the counter keep counting down. If the timer still running, try to restart your PC.

Note: You may not have exactly 43200 minutes remaining, as if you use the “install in 2099″ trick, you will have less than 43200 minutes left, since the crack isn’t applied just after the timer is initialized to 43200 at the end of setup. It’s only possible to get exactly 43200 minutes if you use the “rearm in 2099″ trick, or slightly less than that if your computer is slow.

Upgrade from Previous Version of StopTimer.sys (v1)

If you have already used the previous version of TimerStop.sys (non v2) on your Windows Vista x64, you can upgrade to v2 version by doing the following:

Disable testsigning mode by running the following command in elevated command prompt:

“bcdedit -set testsigning off”

Then just run the installer. There is no need to uninstall or reinstall the Vista experimental crack as the driver hasn’t changed.

Disclaimer: This article is for informational and educational purpose only.

cracks+windows+vista
windows+vista
windows
microsoft
software
vista
activación
piratería
microsoft+cracks